2007-07-13

FreeBSD网卡安装与DHCP配置

关键字: freeBSD dhcp
  1. 运行命令ifconfig查看当前网卡列表，确定名称，如果不在列表内，可能是驱动没装好
    % ifconfig
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:a0:cc:da:da:da
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
        ether 00:a0:cc:da:da:db
        media: Ethernet 10baseT/UTP
        status: no carrier
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500

  2. vi /etc/rc.conf 添加
    ifconfig_dc0="DHCP"
    dhcp_program="/sbin/dhclient"
    dccp_flags=""
  3. reboot后，应该就可以用了
评论
imjl 2007-07-26
这是dhclint模式

也就是自动给分配地址。。。

sysinstall和直接写/etc/rc.conf也可以指定ip

我习惯直接写。不用dhclient